
Home / Lift-assist bollards / Stainless steel, 710mm
Premium finishStainless Steel Lift-Assist Bollard
Our stainless lift-assist post. It's 710mm tall and 101mm across, in brushed satin stainless steel over a steel inner sleeve, and the lift-assist means you only lift about 6kg. The one to choose if you want an easy lift and a finish that stays looking new.
Fixed price confirmed in writing the same working day. Not VAT registered, nothing added on top.
Why choose this post
- You lift about 6kg
- Brushed satin stainless steel that stays looking new
- 710mm tall, set a full metre into the ground
- 2mm stainless outer reinforced with a 5mm steel inner sleeve
Specification
| Height above ground | 710mm |
|---|---|
| Depth below ground | 1,000mm |
| Post size | 101mm round |
| Overall weight | 37kg |
| Weight you lift | About 6kg |
| Finish | Brushed satin stainless steel |
| Construction | 2mm stainless outer, 5mm steel inner sleeve |
| Lock | Key-operated, locks in the raised position |
| Keys | 2 supplied |
What's included
- A check of utility records and a scan for buried cables and pipes
- Core drilling the drive and digging to depth
- Setting the ground sleeve level in concrete
- Making good the surface around the lid
- Fitting and testing the post
- Two keys
- Taking all the waste away
How we fit it
We set the sleeve 1,000mm into the ground, in concrete. One post takes about two hours, and we'll confirm timings with your price.
We fit into block paving, tarmac, resin, concrete and most other hard surfaces. Gravel is fine too. Send a photo of your drive and we'll confirm it's suitable before we fix the price.
Questions about this post
How much is the stainless steel lift-assist bollard fitted?
£1,395 for the first post, fully fitted, and £1,345 for each extra post on the same job. We're not VAT registered, so there's nothing added on top.
How heavy is it to lift?
You lift about 6kg. The lift-assist mechanism takes the rest of the weight.
How deep does it go into the ground?
The sleeve goes 1,000mm into the drive and is set in concrete. We scan for buried cables and pipes before we dig, and move the position if we find one.
What if I lose a key?
It comes with two keys, and we can supply replacements or change the lock.
Can I have more than one?
Yes. Each extra post on the same job is £50 less, because most of the cost is getting to you, scanning and setting up. Two or three posts are usually done in a morning.
More lift-assist bollards
See all lift-assist bollards, or pick "Not sure yet" in the quote and we'll advise.

Black steel
from£1,295first post, fitted
View post
Red steel
from£1,295first post, fitted
View post
Blue steel
from£1,295first post, fitted
View postWhere we fit
Want a fixed price for your drive?
See your price in a minute. We confirm it in writing the same working day, and tell you which post, how many and where.