Home / Lift-assist bollards / Yellow steel

Yellow Steel Lift-Assist Bollard

A yellow lift-assist bollard. A built-in mechanism takes most of the weight, so you lift about 7kg instead of a post that weighs 55kg or more. It's a 114mm post with a reinforced inner sleeve and an integral push-button lock.

Colour

Black Red Blue Green Yellow Silver White Galvanised

Standard 670mm, fitted£1,295

Tall 850mm, fitted£1,349

Each extra standard post£1,245

Each extra tall post£1,299

Get my price 0333 090 8181 WhatsApp

Fixed price confirmed in writing the same working day. Not VAT registered, nothing added on top.

Why choose this post

You lift about 7kg, not the whole post
Standard 670mm or Tall 850mm
114mm post with a reinforced 101mm x 4mm inner sleeve
Integral push-button lock, steel flap closes flush

Yellow is the most visible finish. It's the classic warning colour, easy to see when reversing and in poor light.

Specification

Height above ground	670mm (Standard) or 850mm (Tall)
Depth below ground	960mm (Standard) or 1,125mm (Tall)
Post size	114mm round
Inner sleeve	101mm x 4mm steel
Overall weight	55kg (Standard) or 66kg (Tall)
Weight you lift	About 7kg
Finish	Galvanised mild steel, powder-coated yellow
Lock	Integral high-security push-button lock
Keys	2 supplied

Standard 670mm or Tall 850mm?

Choose Standard 670mm for most cars, or Tall 850mm for SUVs, 4x4s and vans, where a taller post stands out more next to the vehicle.

The Tall post goes deeper too, at 1,125mm against 960mm, which is why it's £54 more. You'll choose the height when you get your price, and we'll advise from your photo if you're not sure.

Above and below ground. The photos of both heights look alike, so this shows the difference.

What's included

A check of utility records and a scan for buried cables and pipes
Core drilling the drive and digging to depth
Setting the ground sleeve level in concrete
Making good the surface around the lid
Fitting and testing the post
Two keys
Taking all the waste away

How we fit it

We set the sleeve 960mm into the ground, in concrete. One post takes about two hours, and we'll confirm timings with your price.

We fit into block paving, tarmac, resin, concrete and most other hard surfaces. Gravel is fine too. Send a photo of your drive and we'll confirm it's suitable before we fix the price.

What happens before we dig

Questions about this post

How much is the yellow steel lift-assist bollard fitted?

£1,295 for Standard 670mm or £1,349 for Tall 850mm, fully fitted. Each extra post on the same job is £50 less. We're not VAT registered, so there's nothing added on top.

How heavy is it to lift?

You lift about 7kg. The lift-assist mechanism takes the rest of the weight.

How deep does it go into the ground?

The sleeve goes 960mm (Standard) or 1,125mm (Tall) into the drive and is set in concrete. We scan for buried cables and pipes before we dig, and move the position if we find one.

What if I lose a key?

It comes with two keys, and we can supply replacements or change the lock.

Can I have more than one?

Yes. Each extra post on the same job is £50 less, because most of the cost is getting to you, scanning and setting up. Two or three posts are usually done in a morning.