Fixed price confirmed in writing the same working dayNot VAT registered: the price you see is the price you pay
Stratfield ProtectionDriveway security bollards
Premium Stainless Steel Telescopic Bollard

Home / Telescopic bollards / Premium stainless, 500mm

Premium Stainless Steel Telescopic Bollard

Our 500mm telescopic post in marine-grade 316L stainless steel. It keeps its finish with very little upkeep, and has the same easy 6kg lift as our steel posts. If you want a stainless post at the lowest price, this is the one.

Height

First post, fitted£695
Each extra post on the same job£645

Fixed price confirmed in writing the same working day. Not VAT registered, nothing added on top.

Why choose this post

  • Marine-grade 316L stainless steel
  • Stays looking new with almost no upkeep
  • Light to lift, at about 6kg
  • Lowers flush, so you can drive and park over it

Specification

Height above ground500mm
Depth below ground700mm
Post size76mm round
Overall weight22kg
Weight you liftAbout 6kg
Finish316L marine-grade stainless steel
LockKey-operated, locks in the raised position
Keys2 supplied

Compare the stainless heights

Our stainless telescopic post comes in three heights. The taller two are wider, at 101mm, and go a full metre into the ground.

Choose 500mm to keep it low-key and light to lift, 710mm for most cars and SUVs, or 900mm for large SUVs and vans.

250mm500mm750mm1000mmGround500mmPremium700mm deep710mmMedium1,000mm deep900mmLarge1,000mm deep
Above and below ground. This post is highlighted.

What's included

  • A check of utility records and a scan for buried cables and pipes
  • Core drilling the drive and digging to depth
  • Setting the ground sleeve level in concrete
  • Making good the surface around the lid
  • Fitting and testing the post
  • Two keys
  • Taking all the waste away

How we fit it

We set the sleeve 700mm into the ground, in concrete. One post takes about two hours, and we'll confirm timings with your price.

We fit into block paving, tarmac, resin, concrete and most other hard surfaces. Gravel is fine too. Send a photo of your drive and we'll confirm it's suitable before we fix the price.

What happens before we dig

Questions about this post

How much is the premium stainless steel telescopic bollard fitted?

£695 for the first post, fully fitted, and £645 for each extra post on the same job. We're not VAT registered, so there's nothing added on top.

How heavy is it to lift?

You lift about 6kg. If lifting is a struggle, look at our lift-assist bollards.

How deep does it go into the ground?

The sleeve goes 700mm into the drive and is set in concrete. We scan for buried cables and pipes before we dig, and move the position if we find one.

What if I lose a key?

It comes with two keys, and we can supply replacements or change the lock.

Can I have more than one?

Yes. Each extra post on the same job is £50 less, because most of the cost is getting to you, scanning and setting up. Two or three posts are usually done in a morning.

CallWhatsAppGet my price