Medium Stainless Steel Telescopic Bollard

Our recommended post. At 710mm tall and 101mm across, it has far more presence on the drive than a 500mm post. The brushed stainless outer is reinforced with a 5mm steel inner sleeve, and the post goes a full metre into the ground. It suits most cars and SUVs.

Height

500mm 710mm 900mm

First post, fitted£995

Each extra post on the same job£945

Get my price 0333 090 8181 WhatsApp

Fixed price confirmed in writing the same working day. Not VAT registered, nothing added on top.

Why choose this post

Taller and wider than a standard post, so it's hard to miss
Brushed stainless outer with a 5mm steel inner sleeve
Set a full metre into the ground
Suits most cars and SUVs

This post weighs about 18kg to lift. If that's too much, the stainless lift-assist bollard is the same height class with about a 6kg lift.

Specification

Height above ground	710mm
Depth below ground	1,000mm
Post size	101mm round
Overall weight	40kg
Weight you lift	About 18kg
Finish	Brushed satin stainless steel
Construction	2mm stainless outer, 5mm steel inner sleeve
Lock	Key-operated, locks in the raised position
Keys	2 supplied

Compare the stainless heights

Our stainless telescopic post comes in three heights. The taller two are wider, at 101mm, and go a full metre into the ground.

Choose 500mm to keep it low-key and light to lift, 710mm for most cars and SUVs, or 900mm for large SUVs and vans.

Above and below ground. This post is highlighted.

What's included

A check of utility records and a scan for buried cables and pipes
Core drilling the drive and digging to depth
Setting the ground sleeve level in concrete
Making good the surface around the lid
Fitting and testing the post
Two keys
Taking all the waste away

How we fit it

We set the sleeve 1,000mm into the ground, in concrete. One post takes about two hours, and we'll confirm timings with your price.

We fit into block paving, tarmac, resin, concrete and most other hard surfaces. Gravel is fine too. Send a photo of your drive and we'll confirm it's suitable before we fix the price.

What happens before we dig

Questions about this post

How much is the medium stainless steel telescopic bollard fitted?

£995 for the first post, fully fitted, and £945 for each extra post on the same job. We're not VAT registered, so there's nothing added on top.

How heavy is it to lift?

You lift about 18kg. If lifting is a struggle, look at our lift-assist bollards.

How deep does it go into the ground?

The sleeve goes 1,000mm into the drive and is set in concrete. We scan for buried cables and pipes before we dig, and move the position if we find one.

What if I lose a key?

It comes with two keys, and we can supply replacements or change the lock.

Can I have more than one?

Yes. Each extra post on the same job is £50 less, because most of the cost is getting to you, scanning and setting up. Two or three posts are usually done in a morning.